Autopilot II On-Line Help

  1. General Information

  1. Theory of Operation
  2. System Components
  3. Glossary
  4. Compare Autopilot I & II

  • Getting Started Quickly

    1. Receiver Installation
    2. Light Installation
    3. Connect the Equipment
    4. Setup your System
    5. Receiver Calibration
    6. Zones and Boundaries
    7. Light Calibration
    8. Test your System
    9. Beltpack & Element Attachment
    10. Running the System
    11. Saving the setup

  • System Setup

    • Long Version

    1. Files
    2. Basic setup
    3. Configure lights
    4. Calibrate Receivers
    5. Calibrate Lights
    6. Boundaries & zones
    7. DMX Channel Assignments
    8. Factory Defaults

  • Installation Procedures

    1. Receiver Installation
      Placement Aiming Wiring
    2. Spotlight Installation
    3. Controller Installation
    4. Beltpack and Beltpack Element

  • System Operation

    1. Test
      receivers,
      lights,
      zones,
      tracking.


    2. Running the System tracking,
      auto-run,
      2D view,
      3D view,
      beltpack channel,
      beltpack height offset.

     

  • System Upgrades

    1. Edit Spotlight models
      XML format
      editing instructions

    2. Downloading Autopilot II software from the Wybron web site

  • TroubleShooting



  • Suggested Installations

    1. Receiver Installations

    2. Beltpack Installations

  • Software history

    1. Help Versions
    2. User Interface versions
    3. Control software versions