Comparisons Between Autopilot I and Autopilot II



The Autopilot II system has improved considerably over the Autopilot I system. The following is a summary of the major differences.

Feature Autopilot I Autopilot II
1. User interface small hand-held terminal PC - with graphics
2. Receiver Calibration procedure manual automatic
3. Spotlight Calibration Procedure manual automatic
4. Light Model Library Creation by Wybron by users
5. Receiver data quality indicator not available graphically on the PC
6. 2D view none yes
7. 3D view none yes
8. Operating Boundary creation numerical graphical
9. Boundary shape symmetrical irregular
10. Zone creation numerical graphical
11. Zone shape symmetrical irregular
12. Zone trace outline with light no yes
13. set beltpack height offset from DMX source from DMX source or PC
14. DMX Channels 512 1024
15. Beltpack Channels 1 contiguous block same
16. Field reprogramming Change Eproms Down load from PC

The Autopilot II system has also maintained the best features of the Autopilot I system. The following is a summary of the major similarities.

Subject Autopilot I Autopilot II
Number of Receivers 8 4-8
Number of Beltpacks 1-4 1-4 (anticipate 8)
3U rack mount controller yes yes