Autpilot Varilite Notes

  1. The Varilite VL6 model is designed for mode 3
  2. All Varilites can be used in modes higher than the model name specifies if you follow these precautions:
    1. When creating new lights on the Autopilot Configure Lights screen you will need to manually enter the correct starting DMX address for each light
    2. You will need to set valid DMX values from the console for all extra channels of the lights that were created by the new mode
    3. If a higher mode number causes the light to acquire a Focus Time channel then you will need to set that channel's value to 100% from your console. If you do not then the light will track the performer much less smoothly